What do you need to pay attention to in industrial aluminum plate processing?

There is a more important step before customizing industrial aluminum plate, that is, processing, the required plates and accessories, according to the requirements in the drawings, generally using CNC equipment or CNC processing equipment to ensure the accuracy of processing. However, even if mechanical equipment is used, it has to be operated by personnel, so it is not guaranteed that there will be no problems with the processing, aluminum plate manufacturers will generally carry out quality inspection before delivery, and problems will be solved before delivery, to ensure that the goods received by customers and drawings are consistent. The following Haomei Aluminum Co., Ltd. will explain to you what are the problems that will occur in the processing of industrial aluminum plates?

1. The specifications are not correct. Industrial aluminum plate has many specifications and models, the same series of more than a dozen specifications, if the processing personnel do not pay attention, it is easy to recognize some specifications wrong, and then there will be processing errors.

2. The size is not right. Industrial aluminum plate cutting accuracy is required, generally to ensure the error within ± 0.5mm, sometimes also need to be controlled at ±0.3mm, greater than this accuracy requirements, are considered cutting errors. Not only length cutting, but also angle cutting, generally to ensure within ± 1 degree.

3. The type of hole is not right. Industrial aluminum plates are sometimes punched. There are many types of holes, including waist holes, through holes, countersunk holes, etc., and the location of the holes is also crucial, so when punching, it is necessary to strictly install the required holes in the predetermined position, and also pay attention to the size and depth of the holes.

The above is a brief introduction to this article, I hope the content in the article can help you.