two common repair methods for automobile aluminum plate dent

How to restore sunken aluminum 3

There are two common repair methods for automobile aluminum plate dent repair, which are divided into top warping type and pull-out type. Let's talk about pull-on repair today.

Insert the hot melt adhesive stick from the back of the glue gun to allow the glue stick to enter thoroughly. Insert the glue gun into the power outlet, adjust the temperature of the glue gun to *high, and preheat for 3 or 5 minutes to let the hot melt adhesive melt completely. Then select the appropriate traction gasket according to the diameter of the dent, pull the glue gun trigger, and coat the traction gasket with melted glue.

In this way, the aluminum plate slowly dented. If protrusions appear in the place of pulling, use a rubber hammer and a special wooden pen to knock back and forth until the dent blends into the paint. If dent repair is not ideal, this step can be repeated, but some depressions are generally difficult to restore the body depression to its original state by pull-out repair technology alone. Generally, relatively gentle depressions can be repaired by pulling. If the above repair process cannot restore the dent of the automobile aluminum plate to its original state, we need to use the second top-warping method to repair it.

Of course, there is another way to repair the dent of the automotive aluminum plate, that is, through the top warping repair, from the reverse side of the sheet metal to repair again. As for the details of this fix, we mentioned it in detail in the previous article. If you are interested, you can check out the top warp repair of the aluminum body.