Aluminum foil waterproofing roll material construction method

Aluminum foil waterproofing roll material construction method

Aluminum foil waterproofing membrane is now widely used in the waterproofing market, especially in the roof with more extensive - - some, with ultraviolet light reflection, waterproof insulation effect, the following aluminum foil waterproofing membrane how to construction.

1. laying base film: check whether the grass-roots level of the wall is clean, the surface is not loose off, if there are problems timely rectification advice; no problem is laid on the wall special base film to protect the wall is not easy to moisture, play the role of alkali-resistant closed, easy to replace the wall of aluminum foil waterproofing membrane is not easy to destroy, after a day or so, and so the wall dry can be paved aluminum foil waterproofing membrane.

2. look at the layout: in the laying of the base film at the same time, pay attention to the structure of the entire room, which key parts are more difficult to paste to do a number.

3. Calculate the length: measure the length of each paving room wall. Prevent excessive wear and tear in the paving process resulting in insufficient aluminium foil waterproofing membrane. Pay attention to the wall height and room pattern and customer requirements a - corresponding, to prevent mis-paste.

4. adjustment, paving glue: the next mix of glue powder mixed with water fully mixed into a paste (no solid powder point), and then poured into the glue slurry, generally 2 square meters of glue to 4 square meters of water or so, the mixture into a thin and thick, evenly spread on the wall.

5. positioning: two people need to work together to hang the aluminum foil waterproofing membrane, hanging on the ground before the health of the cleaning down. A person in the following take cloth and according to the positioning speed synchronous unfold aluminum foil waterproofing roll-roofing, the other person to control the cloth surface tightness this will affect the shade can do beautiful.

6, scraping coil press: from the upper position of the aluminum foil waterproofing roll-roofing material. With scraping coil to scrape around the sticky aluminum foil waterproofing roll-roofing material.