Precautions during use of 1050 color coated aluminum roll for sale Haomei

1050 color coated aluminum rolls for sale are a commonly used raw material in life and industry, and especially many household appliances are made of aluminum products, so 1050 color coated aluminum roll is very important at this time. So what are the precautions for the use of 1050 color coated aluminum roll? Let's talk about it by Haomei Aluminum.

We first introduce the 1050 color coated aluminum roll. First, if it is to be put into use, the aluminum coil itself should be at a normal temperature, the temperature should not be too overheated or too cold, and if used as a roof, the height should not be lower than 10 degrees. Second, before the installation, check in time to ensure that the roofing material has no signs of wear and tear, to ensure that it can be used normally, and to ensure the service life under normal conditions. Third, the bolt head fixing the 1050 color coated aluminum roll should be sealed with a strong waterproof material to prevent rainwater from entering and rusting. Fourth, the ambient temperature of the color-coated aluminum coil processing should be above 7 °C, and the gap of the processing roller system should be adjusted according to the thickness of the color-coated aluminum coil, and the foreign matter on the roll surface and the pallet should be removed; at the same time, check the 1050 color coated aluminum roll Whether the paint on both sides is peeling off, if the paint is peeling off, the cause should be identified and measures should be taken before continuous processing.

In the process of processing and use, the aluminum coil sometimes presents a tower shape after being cut. What is the reason? The bending phenomenon occurs when the thermal insulation aluminum coil is cooled. The reason is: under the condition of general air cooling, the heat transfer coefficient of each part of the thermal insulation aluminum coil in contact with the air is the same, but because of the different wall thickness or shape, the heat dissipation rate of each part is different. Unbalanced, the heat dissipation rate of the thick-walled part or the hollow tube is slower than that of the thin-walled part, and finally the 1050 color coated aluminum roll thermal insulation aluminum roll will appear to the hollow part when it is cooled.

Through the above introduction of Haomei Aluminum. We learned about it. Only by understanding the relevant precautions can we manufacture articles with different characteristics according to different states of aluminum coils.