aluminum-magnesium-manganese roof panels

What should be paid attention to when transporting aluminum magnesium manganese roofing panels？

1. When hoisting bundles of aluminum sheets, a boom must be used. The sling should be vertically hoisted on the aluminum plate and placed on the hoisting point. It should be hoisted in a single bundle. Place carefully. Do not drag with the aluminum plate. Drag with an aluminum plate must be placed carefully. It depends on the length of the aluminum plate. When hoisting, the aluminum plate should be placed in the installation direction to avoid the aluminum plate being reversed on the installation table. The surfaces of the aluminum plates must not drag each other to avoid damage to the paint.

2. When stacking aluminum-magnesium-manganese roof panels, each stack should not exceed four boxes, and heavy objects or pedals should not be placed on the aluminum panels, so as not to loosen the buckles between the aluminum panels and damage the surface paint or even the aluminum panels.

3. The installation sequence of the aluminum-magnesium-manganese plate roof panel screws must be consistent with the direction of the aluminum plate paving, and it is strictly forbidden to buckle. When cutting aluminum plates, try to do it on the ground platform and do not get close to other aluminum plates. If doing it on the mounting platform, do not do this work on other aluminum panels. When cutting, the aluminum sheet faces down. Residual debris from the cut aluminum sheet must be removed. All iron filings and debris should be removed after daily work.

4. When installing the aluminum-magnesium-manganese alloy plate roof, the aluminum plates that cannot be installed on the ceiling plate should be stacked together to prevent the aluminum plates from being blown away by the wind. When marking the aluminum-magnesium-manganese-aluminum panel, a water pen should be used, no pencil should be used, and lead, copper and other materials should not be touched, and the silicone side should not be painted.

Do you now know what to pay attention to when transporting aluminum magnesium manganese alloy plates? I hope this helps. If you need to buy aluminum-magnesium-manganese plate, please contact us Haomei Aluminum Co., Ltd. We sell aluminum alloy sheets in various row numbers. Our prices are low and sold at factory prices. Our products are of good quality and can provide quality assurance for the products you will make in the future.